Sailing Cable Railing System II – Metal Post
Couldn't load pickup availability
Sailing cable railing system II – Metal post
The sailing cable railing assembly kit combines elegance and robustness, such as the marine hardware that can be found on several sailboats all over the world. Easy to install, this kit can tension cable over 60 feet.
This kit for one run of wire rope cable includes :
The hardware features a mechanical swage fitting which allows for fast attachment using simple hand tools.
A cable railing should include 7 to 11 lines of cable, depending on the height of the posts.
The system is suitable for both indoor and outdoor cable railing projects.
On the front side of your end posts, drill a 11/32’’ hole in diameter to install the stainless steel threaded eyebolts.
On the back side of your end posts, drill a 7/16 hole in diameter to install the threaded sleeves. Screw fully the threaded sleeves onto the threaded eyebolts.
Attach the swageless jaw turnbuckle and the swageless jaw terminal to the threaded eyebolts.
Unscrew the cone of the swageless jaw terminal (with clevis pin) and insert the cable into the cone and the wedge until it is fully seated in the terminal. Tighten securely using two wrenches.
Cut wire rope by measuring the distance to the swageless jaw turnbuckle. Unscrew the cone of the swageless stud terminal and insert the cable into the cone and the wedge until it is fully seated in the terminal. Tighten securely using two wrenches.
For tensioning, simply rotate the turnbuckle body.